Automatic small corner angle cutting machine
Main technical parameters
Control method: touch screen CNC control
Corner mode: double servo motor drive, double ball screw drive, digital automatic corner
Cutting method: geared motor drive, broach cutting
Cutting angle: 0-10 angle
Cutting accuracy: ±0.5mm
Cutting capacity: 10-15 layers of carbon fiber cloth, 15-20 layers of fiberglass cloth
Cutting length: 1500mm (optional 1800/2100/2400/2700 length specification)
Power supply: 380V/50Hz
Gas source: 0.4-0.6MPa
Dimensions: 2300 × 1500 × 1600mm
The traditional small piece of cloth is very laborious and time-consuming. It requires two people to be cut, and it is cut many times. The safety is also poor. On the contrary, the equipment only needs to place the large-sized cloth on the table, according to the processing requirements. Touch screen input big end size, small end size, length size, cutting quantity, press the start button, automatically cut the whole cloth, or you can cut 2 types of small cloth on one cloth according to your requirements.
Main features: This machine adopts the touch screen to set the process parameters, the servo motor drives the inverted corner, and the small multi-layer carbon fiber cloth and the fiberglass cloth are cut into small pieces, which can cut the trapezoidal cloth.
Rectangular cloth can be cut, the cutting size is accurate, the operation is simple and safe, the labor can be effectively liberated, the work efficiency is improved, and the production cost is reduced. It is a new type of cutting equipment.